Hainan New Energy Office Curtain Wall Project with 3.0mm PVDF Solid Aluminum Panels

By Jack
/ 4 July, 2026

This Hainan new energy office curtain wall project used 3.0mm white solid aluminum panels with a three-coat PVDF fluorocarbon finish. The panels were made from 3-series aluminum alloy and applied to the exterior office facade, including vertical wall cladding, window surrounds, entrance areas and rounded corner transitions.

Hainan new energy office building facade with white 3.0mm PVDF solid aluminum panels by Punchuk — Completed Hainan new energy office facade using white PVDF solid aluminum panels and vertical curtain wall cladding.

For buyers comparing exterior aluminum cladding suppliers, this project is useful because it shows the full project logic: elevation drawings, panel segmentation, factory production, PVDF coating, site entry, installation coordination and finished facade appearance. It also shows why a custom solid aluminum panel manufacturer needs to understand both drawings and installation sequence, not only panel price.

Project Facts

Project location	Hainan, China
Building type	New energy office building facade and curtain wall cladding
Main material	3.0mm solid aluminum panel, also called aluminum veneer or aluminum single panel
Aluminum alloy	3-series aluminum alloy panel for exterior architectural cladding
Surface finish	White three-coat PVDF fluorocarbon coating for exterior weather resistance
Application	Office facade, vertical cladding, window surround panels, entrance areas and corner transitions

From Elevation Drawings to Aluminum Panel Segmentation

The project started with facade elevation drawings for the A, B and C sides of the building. The drawings show the aluminum panel grid, window openings, recessed facade areas, entrance positions and vertical facade rhythm. For a 3.0mm aluminum panel project, drawing review is important because the factory must convert the architectural elevation into manufacturable panel sizes.

Elevation drawings for Hainan new energy office aluminum curtain wall panels — A, B and C elevation drawings used for panel layout review, facade segmentation and aluminum panel production planning.

During this stage, the supplier should check panel dimensions, joint width, corner return, fixing points, window interface, coating color and installation sequence. For overseas buyers, this is also the stage where the quotation becomes more accurate. A buyer should send elevation drawings, section details and a BOQ if available, rather than asking only for a square-meter price.

Why 3.0mm White PVDF Solid Aluminum Panels Were Used

The facade uses 3.0mm solid aluminum panels because the building needed a clean exterior surface with durable panel stiffness and stable flatness. A 3-series aluminum alloy panel is commonly selected for architectural aluminum veneer projects because it can be cut, bent, formed, reinforced and finished for exterior cladding.

The white three-coat PVDF fluorocarbon coating is also important for Hainan. The local environment has strong sun, humidity and coastal weather exposure. PVDF coating helps the aluminum facade maintain color stability, weather resistance and a clean office-building appearance over time.

Buyer note: when comparing suppliers for a 3.0mm PVDF aluminum panel project, confirm the alloy, coating system, color standard, panel thickness, folded edge, stiffener design, installation accessories, packing method and project delivery schedule.

Design Intent and Project Appearance

The design uses a white aluminum facade with vertical panel rhythm and dark curtain wall glazing. The clean white panel surface gives the office building a technical and modern appearance, which matches the identity of a new energy office project. The vertical aluminum cladding also helps the facade look taller and more ordered.

Hainan new energy office aluminum panel project rendering and overall site concept — Project rendering showing the white office facade concept before aluminum panel production and installation.

Completed Hainan new energy office aluminum curtain wall with white PVDF panels — Completed front elevation of the Hainan new energy office building with white PVDF aluminum curtain wall panels.

Site Entry and Installation Process

The site photos show the project moving from substrate preparation into aluminum panel installation. The facade required coordination between the building substrate, metal support frame, window openings, entrance canopy, lifts and installation workers. The aluminum panel sequence had to follow the elevation drawings so the vertical lines and panel joints stayed consistent across the building.

Hainan office curtain wall aluminum panel project site entry and substrate preparation — Site entry stage showing facade substrate, access work and preparation before full aluminum panel installation.

3.0mm PVDF white aluminum panel site installation for office curtain wall — Installation stage with lifts and workers fitting white solid aluminum panels on the office curtain wall facade.

For projects like this, panel labeling and packing order matter. If panels are not clearly numbered according to elevation and floor position, site installation becomes slow and mistakes are easier to make. Punchuk can prepare panel numbering, packing lists and drawing references to help contractors install custom aluminum panels more efficiently.

Facade Details: Corners, Windows and Finished Panel Joints

One important part of this Hainan project is the corner and window surround treatment. The white panels are not only flat wall cladding; they also define corners, recessed window areas and transition zones. These details require accurate fabrication, clean folded edges and stable PVDF surface quality.

White solid aluminum panel corner installation for Hainan office facade — Corner and vertical facade areas showing white solid aluminum panel installation and transition details.

3.0mm white PVDF aluminum panel facade detail with curtain wall glass — Finished facade detail showing white aluminum panels, window openings, curtain wall glass and clean panel joints.

Factory Workflow for a Similar 3.0mm PVDF Aluminum Panel Project

1. Drawing reviewCheck elevations, sections, panel grid, window openings, corner returns and entrance details.

2. Panel layoutConfirm panel sizes, folded edges, stiffeners, installation holes and panel numbering.

3. FabricationCut, bend, form and assemble 3.0mm solid aluminum panels according to approved drawings.

4. PVDF coatingApply white three-coat fluorocarbon coating with color and surface quality control.

5. PackingLabel panels by elevation and installation sequence, then pack for site or export delivery.

6. Site supportHelp the project team match panel numbers with drawings during installation.

What Buyers Should Prepare Before Requesting a Quote

Facade elevation drawings and section drawings
Panel thickness requirement, such as 2.0mm, 2.5mm or 3.0mm
Alloy or specification requirement, such as 3-series aluminum alloy
PVDF coating system, color code and gloss requirement
Panel quantity, approximate square meters and delivery schedule
Project location, packing requirement and installation sequence needs

Punchuk Support for Solid Aluminum Panel Projects

Punchuk manufactures custom solid aluminum panels, perforated aluminum panels, curved panels, aluminum wall panels and PVDF coated facade panels for office buildings, hotels, commercial facades and public projects. For a project like this Hainan new energy office, Punchuk can support drawing review, sample confirmation, production, coating, quality control, packing and delivery coordination.

FAQ

What aluminum panel specification was used for this Hainan office facade project?

The project used 3.0mm solid aluminum panels made from 3-series aluminum alloy, finished in white three-coat PVDF fluorocarbon coating for exterior curtain wall cladding.

Why use PVDF three-coat white aluminum panels for a Hainan facade?

Hainan has strong sun, humidity and coastal weather exposure. PVDF fluorocarbon coating helps exterior aluminum panels keep color stability, weather resistance and a clean facade appearance.

Can Punchuk support aluminum panel projects from drawings to site installation?

Yes. Punchuk can review elevation drawings, coordinate panel segmentation, manufacture custom solid aluminum panels, arrange PVDF coating, label panels for installation and support project delivery.

What information should buyers send for a similar aluminum curtain wall quotation?

Please send elevation drawings, section details, panel thickness, alloy or specification requirement, finish color, coating system, quantity, project location, packing requirement and delivery schedule.