Custom Aluminum Panel Project References for Facades, Canopies and Ceilings

By Jack Leung
/ 28 June, 2026

Project reference portfolio

Custom aluminum panels for facade, canopy and interior ceiling projects

Punchuk manufactures custom aluminum panels for building projects that need durable metal cladding, clean architectural details and project-based fabrication support. These project references show exterior facade cladding, hotel entrance panels, commercial mall canopies, service station cladding, interior aluminum ceilings, decorative wall panels, painted aluminum panels and overseas project delivery.

Solid aluminum panels Perforated panels Send drawings

Malaysia hotel custom solid aluminum panel facade project by Punchuk — Malaysia hotel exterior facade using custom solid aluminum panels and decorative aluminum cladding.

For most commercial facade and interior projects, buyers compare aluminum panel thickness options such as 2.0mm, 2.5mm and 3.0mm according to panel size, wind load, support frame, location, finish requirement and budget. Punchuk can review drawings, panel layouts, photos or BOQ files before recommending a practical aluminum panel specification.

Main applicationsFacade cladding, entrance canopies, soffits, interior ceilings, wall panels and renovation surfaces.

Panel typesSolid aluminum panels, perforated panels, shaped panels, painted panels and aluminum ceiling panels.

Common thickness2.0mm, 2.5mm and 3.0mm, selected according to project drawings and installation conditions.

Factory supportDrawing review, fabrication, surface finishing, QC, packing, container loading and delivery coordination.

PUNCHUK project photographs

Solid aluminium details from our project sites

These PUNCHUK site photographs show where curved bands, folded edges and soffit panels meet windows, corners and unfinished facade zones. Choose the detail closest to your project, then mark the panel package you need quoted.

01 / APPLICATION DETAIL

Curved bands and projecting soffits

A front elevation shows the overall curve. The quote also needs the underside, return depth and the points where panels meet glazing or columns. Mark the curved areas separately from the flat panels in your BOQ.

Read the curved-panel guide

Include in your drawing package

Elevations with panel zones and marks
Radius information or the available 3D model
Soffit plan and edge sections
Interfaces with windows and columns

White facade bands turn around glazed corners above a projecting soffit, with site materials and a truck below. — Curved facade bands, glazed corners and the projecting underside in a site view.

Repeated white facade bands wrap around a rounded building corner beneath a glazed upper level. — Repeated bands and window interfaces around a rounded corner.

A wide projecting soffit below curved white facade bands and dark glazing, with columns and construction materials below. — The underside and edge of a projecting curved facade area.

Wide site view of curved white facade bands, dark glazing and a projecting wing above round columns. — A wider view of the facade bands and projecting wing.

02 / APPLICATION DETAIL

Folded edges, fascia and balcony soffits

The visible face, folded return and underside may need separate dimensions and panel references. For these details, send sections as well as elevations. Identify any light openings and the adjoining glass, wall or roof-edge components.

See solid aluminium panel options

Include in your drawing package

Face size and return depth
Outside-corner and edge sections
Soffit joints and light openings
Specified finish and panel quantities

Dark balcony fascia and soffit panels meet at an outside corner below a glass balustrade, with a recessed light underneath. — Balcony fascia, folded corners and soffit joints below a glass balustrade.

Dark roof-edge fascia and soffit cladding above pale walls, with scaffolding and protective sheeting below. — Roof-edge fascia and soffit returns viewed during site work.

White roof-edge cladding frames a dark angular facade, with windows and a red access platform above unfinished ground. — Angular facade and roof-edge interfaces while access equipment remains on site.

03 / APPLICATION DETAIL

Site-stage views and facade interfaces

These views show panel zones beside open framing and access equipment. For a comparable job, mark which facade areas are included in the panel package and supply the available support details. The photos show a site stage, not a record of factory production or completed acceptance.

Read the site-coordination guide

Include in your drawing package

Both elevations at the corner
Panel zones included in the quotation
Available support and interface drawings
Current project stage and drawing revision

Tall building with white facade bands, dark panel zones, exposed framing and access equipment. — Panel zones and exposed framing in a tall-building site view.

Low-angle view of a tall building corner with white bands, dark facade areas and open framing near scaffolding. — A building corner with adjoining facade areas still visible during site work.

Views are grouped by application, not as one project or a construction sequence. Final panel thickness, finish, fixings and supply scope come from the project documents.

Have a similar detail in your drawings?

Send CAD/PDF drawings or a BOQ with panel zones marked. Include the quantity or area, proposed thickness or not yet decided, finish, project stage, project city and delivery country. Reference photos help explain the detail; dimensions and requirements belong in the drawing set.

Send drawings or a BOQ Use the RFQ checklist

Project references by application

The images below were selected from Punchuk project records. They are useful for architects, contractors, facade consultants, distributors and project buyers comparing custom aluminum panel manufacturers for real building applications.

Hainan new energy office curtain wall with 3.0mm white PVDF solid aluminum panels by Punchuk — Hainan office PVDF aluminum curtain wall

Hainan new energy office facade

This project used 3.0mm white three-coat PVDF solid aluminum panels for an office curtain wall in Hainan, with drawings, production progress, site installation and completed facade photos.

Solomon Islands stadium aluminum panel project reference by Punchuk — Overseas stadium project support

Stadium and overseas project delivery

The Solomon Islands stadium records include renderings, project photos and shipment records, showing export packing, container loading and delivery coordination for public building projects.

Commercial mall aluminum ceiling and canopy panels with warm metallic finish — Commercial mall canopy and ceiling panels

Shopping mall canopies and ceilings

Commercial projects often combine flat panels, folded panels, ceiling panels, warm metallic finishes and custom edge details in one building area.

Hotel entrance aluminum canopy panels with champagne color finish — Hotel entrance aluminum panels

Hotel entrance and canopy panels

Hotel entrances need clean panel joints, color consistency, folded edges and durable surface coating for rain canopies, front elevation details and soffit areas.

Curved aluminum canopy cladding for service station project — Curved service station canopy cladding

Service station and curved canopy cladding

Service station projects may need curved panels, canopy fascia, column covers, brand color matching and exterior-grade coating for weather-exposed areas.

Curved white aluminum ceiling panels for hospital meeting room interior — Interior curved aluminum ceiling panels

Interior aluminum ceilings

Aluminum ceiling panels are suitable for meeting rooms, hospitals, hotels, offices and commercial interiors that need clean lines, access zones and custom curved design.

Patterned aluminum wall panel for cultural activity center interior — Decorative patterned aluminum wall panel

Decorative wall and feature panels

Patterned aluminum panels can create a strong feature wall for cultural buildings, halls, public interiors and commercial decoration projects.

Painted aluminum panels for decorative commercial interior project — Painted aluminum panel project

Painted and themed aluminum panels

Painted aluminum panels are useful for themed commercial spaces, cultural areas, retail interiors and decorative wall applications where visual storytelling matters.

Custom solid aluminum facade panels for Malaysia hotel exterior — Hotel solid aluminum panel facade

Hotel facade cladding

Custom solid aluminum panels can be used for exterior facade cladding, vertical features, geometric surfaces and hotel elevation renovation.

Independent application references: light, junctions, perforation and soffit interfaces

These four images are independent application references for early design discussions. They do not form one construction sequence, and they are not four verified PUNCHUK projects. The photographs show lights beside perforated areas, curved forms meeting ceilings, perforated bands crossing a corner, and soffit joints meeting a wrapped support. They do not establish material, thickness, finish, location, performance or supply scope. Use them to frame questions for the actual drawings, schedules and site conditions.

Installation-stage corridor with linear lights, perforated ceiling and wall areas, scaffolding and unfinished flooring — Reference view of light lines and perforated surfaces during corridor installation.

Light lines beside perforated surfaces

The corridor is still under construction. Parallel light lines run beside perforated ceiling and wall areas, while scaffolding, loose services and unfinished flooring make the work sequence visible. For coordination, the reflected ceiling plan should locate each light run against the ceiling divisions before the team releases fabrication drawings. Wall elevations can then set the height and limits of the perforated bands, including transitions at corners, doors and service zones. During site review, the team can compare the installed lines with the approved datum and confirm that access points remain usable. The image records one arrangement at one stage of construction. It does not confirm the substrate, panel material, aperture pattern, lighting output or completed performance.

White branching column forms meeting curved ceiling surfaces beneath linear lights and a dark ceiling grid — Reference view of curved column-to-ceiling junctions and illuminated edges.

Curved column-to-ceiling junctions

The view looks upward at white branching forms where they meet curved ceiling surfaces. Continuous edge lighting makes small changes in alignment easy to see, especially where several curves converge. A useful drawing set would show plan geometry, sections through each branch, centre lines, radii, joint positions and the offset reserved for the light channel. Numbered views can help the fabricator and installer refer to the same junction without depending on a single perspective rendering. Before production, the project team should confirm how the visible surfaces terminate at the dark ceiling grid and where the details allow for site tolerances. The photograph does not identify the material, fabrication method, structural role or lighting specification.

Low-angle view of a white building corner with perforated bands, unperforated areas and visible panel joints — Reference view of perforation zoning and panel joints across a building corner.

Perforation across a building corner

Here, perforated bands cross a white building corner. Broad unperforated areas and visible joints break up the pattern. The corner deserves close review because a pattern that reads evenly on a flat elevation may change when it wraps onto the adjacent face. Elevation drawings should set the perforated zones against the module grid, while corner details should define how the pattern stops, turns or resumes. Shop drawings can record panel references, joint widths and the relationship between openings and perimeter edges. If the intended system must provide screening, ventilation or another function, the project documents and calculations should define those requirements. The image does not confirm the material, opening ratio, coating, support system or performance.

Warm-toned soffit surfaces with recessed lights meeting a tall wrapped support and narrow edge slats — Reference view of soffit divisions meeting a wrapped support.

Soffit divisions meeting a wrapped support

Warm-toned soffit surfaces meet a tall wrapped support in this upward view. The joint grid, recessed lights and narrow edge slats create several interfaces within a small area. Coordination drawings should fix the soffit datum, support centre line, joint locations and light cut-outs before the team releases the finish package. Enlarged details can show whether joints continue across the soffit and support wrap, where trims or gaps occur, and which component the installer fits first. The project team also needs a physical sample or an approved finish schedule before buyers describe the colour and surface appearance in purchasing documents. This reference does not establish that the visible finish is wood, wood grain, aluminum or any other material.

Curve, colour, light and form video reference

Four independent application and manufacturing references appear in this 23.5-second video: curved facade lines, bronze-toned architectural surfaces, an illuminated geometric ceiling and a formed perforated assembly. Brief motion clips sit between the still references. The sequence gives a project team a quick way to point to a visual direction before discussing drawings. It is a visual index, not a case study, and the clips do not represent one project, location or construction timeline. The video does not prove material specifications, performance or PUNCHUK’s complete supply scope for any building shown.

If your drawings specify solid aluminum, compare the available solid aluminum panel options. When you are ready to request pricing, use the custom aluminum cladding RFQ guide to organize the drawings, quantities, finish requirements and delivery information for review.

What buyers should send for quotation

To prepare a realistic quotation for custom aluminum panels, send project country and city, application area, drawings, panel size, thickness preference, finish, color, quantity, packing requirement and delivery schedule. Reference photos are useful when the project has curved panels, patterned panels, painted panels or special-shaped aluminum cladding.

Punchuk factory support workflow

Drawing review: check elevation drawings, ceiling drawings, panel sizes, thickness, finish and quantity.
Panel layout discussion: confirm joints, folded edges, reinforcement, installation holes and special-shaped details.
Material and thickness selection: compare 2.0mm, 2.5mm and 3.0mm options according to project use.
Fabrication: cutting, punching, bending, welding, grinding, reinforcement and trial assembly when needed.
Surface finishing: PVDF coating, powder coating, wood grain, stone look, painted finish or custom color coating.
QC and packing: check dimensions, surface finish, color consistency, labels, packing lists and export loading details.

FAQ

Can Punchuk manufacture custom solid aluminum panels for facade projects?

Yes. Punchuk can manufacture custom solid aluminum panels, aluminum veneer panels and folded aluminum cladding panels according to project drawings for facades, curtain wall areas, entrances, canopies, columns and commercial walls.

What thickness is common for aluminum panel projects?

Common project thickness options include 2.0mm, 2.5mm and 3.0mm. The final thickness should be selected according to panel size, wind load, installation method, location, flatness requirement and budget.

Can aluminum panels be used for interior ceilings?

Yes. Aluminum panels can be used for interior ceilings, curved ceilings, ceiling grids, baffle-style ceiling systems and wall-ceiling combinations in hotels, hospitals, meeting rooms, shopping malls and public interiors.

Can Punchuk support overseas aluminum panel projects?

Yes. Punchuk can support overseas projects with drawing review, custom production, panel numbering, export packing, container loading and delivery coordination.